> Megane 3 > How to replace the injectors Megane 3 1.5 dCi 🚗
How to replace the injectors Megane 3 1.5 dCi 🚗
Chapter 1 : Intro
Necessary tools16 Tools
Toolbox
No lifting equipment necessary
11mm spanner
17mm spanner
Small brush
Plastic tube
Torque wrench
Nos ressources
Les warnings de la Clé
Be careful when carrying out the following steps to remove the injector. You have to ensure that you can put the injector in a safe place as it is a very fragile and expensive part.
Les infos de la Clé
We recommend not handling the injector a lot and not touching the point where the diesel evaporates. If you are only changing the seal (and not the injector), there is no reprogramming needed. However we recommend taking a photo of the numbers on the injector just in case.
UseTool EN
Disclaimer
This video was created for information purposes and does not guarantee the outcome of actions undertaken. To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation. This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content. This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.